مقالات کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی در تاریخ ۱۳ اسفند ۱۳۹۸ در پایگاه سیویلیکا نمایه و منتشر شد. این رویداد در تاریخ ۲۹ بهمن ۱۳۹۸ تا ۳۰ بهمن ۱۳۹۸ توسط دانشگاه علم و صنعت ایران و تحت حمایت سیویلیکا در شهر تهران برگزار شده است.در این رویداد ۹۳ مقاله شامل ۱۸۶ صفحه ارائه شده است.بر اساس تحلیل اولیه انجام شده، مقالات این دوره از کنفرانس عمدتا در موضوعات زیر ارائه شده است:
- microstructure
- mechanical properties
- low
- non
- finite element method
- wavelet analysis
- shape memory alloys
- sandwich panel
- renewable energy
- tensile strength




لیست و عناوین مقالات نمایه شده از کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی به صورت زیر می باشد:
۱. Mathematical Modeling of Unequal Rivets’ Shearing Load Distribution
۲. A Novel Surface Nanocomposite of Carbon Nanotube/Poly Ether Ether Ketone Fabrication via Friction Stir Processing for Orthopedic and Dental Application
۳. Experimental Study of Low-velocity Impact on Polyurethane Foam Core Sandwich Panels Reinforced by Steel Wire
۴. Experimental Investigation of GFRP Reinforced Concrete Tensile Strength Using Brazilian Test Method
۵. Mechanical Crystallization of Fe-Ti Alloy during Ball Milling
۶. Phase Analysis of Mg-Si-Ni In-situ Composites
۷. Kinetics Study on Size and Morphology of KTP Nanoparticles Synthesized by Co-precipitation Method Using PVA as Capping Agent
۸. Experimental and Numerical Study on Impact Resistance of Aluminum-Copper Cladded Sheets
۹. Experimental and Numerical Study on Fracture in Notched Functionally Graded Metallic Biomaterials
۱۰. Experimental Study on the Fatigue Behavior of Conventional and Severe Shot Peened Molybdenum Alloy Steel
۱۱. Investigation of Mechanical Properties of PMMA Cement Impregnated with Ciprofloxacin and Vancomycin
۱۲. Microstructure and Phase Formation in the Mg-Zn-Ca-RE Magnesium Alloys
۱۳. In-plane Fracture Assessment of Cracked Bone Cements by means of the Generalized Strain Energy Density Criterion
۱۴. Geometric Simulation of Surface Topography in Unstable Boring Process Using ۳D ACIS Modeler
۱۵. Torsion of a Thin Film Coated Shaft Using FEM
۱۶. Tensile Characteristics of Through-the-thickness Stitched E-Glass/Epoxy Composite
۱۷. Buckling Enhancement of E-Glass/Epoxy Composite Laminates by Through-the-thickness Stitches
۱۸. Experimental and Numerical Analysis on Compression Behavior of Smart Composite Sandwich Panel with Cor۱gated Core
۱۹. Experimental and Numerical Analysis on Compression Properties of Corrugated Core Composite Sandwich Panel
۲۰. Experimental Investigation on Compression Properties of Hollow Composite Cylinder Reinforced by Glass Fiber and Shape Memory Alloy Wire
۲۱. Tribology Investigation on Aluminum Sheets for Forming Applications
۲۲. Effect of Heat-treatment on Microstructure and Mechanical Properties of an Automotive Body Steel
۲۳. Effect of Post Weld Heat Treatment on Tensile Behavior of Al ۲۰۲۴-T۸ Friction Stir Welded at Different Rotational Speed
۲۴. Experimental Analysis of Effect of Shape Memory Alloy Wires on High-velocity Impact Response of Corrugated Core Composite Sandwich Panel
۲۵. An Experimental Study of the Internal Space of Hand in Strength-grip Position for the Ergonomic Design of Hand Tools
۲۶. Effect of Probe Indentation Depth on Mechanical Behavior of Friction Stir Spot Weld of Al ۶۰۶۱-T۶
۲۷. Troubleshooting Mill Fan in Kerman Cement Company by Vibration Analysis Method(Case Study)
۲۸. Effect of Loading Rate on the Adhesive Bonding of E-glass/Epoxy Composites to Polyethylene: Experimental Approach
۲۹. Viscoelastic Behavior of SMA Reinforced Polymers
۳۰. Adhesion Improvement of Silicone Rubber Coatings to Ceramics
۳۱. Using Shape Memory Alloys to Improve the Fatigue Performance of Polymeric Laminated Composite Materials: Modeling Philosophy
۳۲. Hydrophobicity Improvement of Cycloaliphatic Epoxy-based Nanocomposite Coatings
۳۳. Optimization of Mechanical and Self-Healing Properties of Thermally Reversible Self-Healing Polymer Composites
۳۴. Effect of Acid and Thermal Aging on the Mechanical Properties of E-glass Fibers
۳۵. Computational Study for the Characterization of Fiber-metal Laminates Using Lamb Wave Propagation
۳۶. Assessment of the Effect of Carbon Nanofibers on Matrix Cracking in Laminated Composites Using Lamb Wave Propagation
۳۷. Importance of Grain Growth during Intercritical Anneal of Advanced High-strength Dual-phase Steels
۳۸. The Effect of Raster Orientation on the Mode I Fracture Toughness of Additively Manufactured PC Specimens Printed in the Out-of-plane Direction
۳۹. Effects of Extension Rate on Mechanical Behaviors of PMMA
۴۰. Estimation of Mechanical Properties in Non-homogeneous Body Using Surface Displacement Measurements
۴۱. Image Based Micromechanical Method for Simulation of Damage Zone
۴۲. Experimental Investigation on Stacking Sequence of Glass Fiber Composite Tubes under Quasi-static Axial Compression
۴۳. Biomechanical Analysis of the Effect of Temperature and Humidity on Intervertebral Segments under Impact Load
۴۴. Study on Fatigue Life of Engine-Exhaust Pipe Flexible Couplings
۴۵. Sensory Configuration of Stewart Platform-A Numerical Study
۴۶. Evaluating the Accuracy and Reliability of Digital Image Correlation in One-dimensional Rigid Displacement
۴۷. Deflection Study of Circular Auxetic Thin Plate Under Static Loading
۴۸. Experimental and Numerical Investigation of the Ability of New Material from Aluminum Casting on Pumice Particles to Reduce Shock Wave
۴۹. Laser Measurement Technique in Split Hopkinson Pressure Bar
۵۰. Numerical Simulation of Grooved Heat Pipe Deformation by Extrusion Process
۵۱. Fatigue Finite Element Analysis of a Notched ۸۶۳۰ Alloy Steel Sample under Cyclic Axial Loading
۵۲. Identification of Non-linear Vibrating Systems based on Instantaneous Frequencies and Amplitudes of Dynamic Response
۵۳. Sensitivity Analysis of Continuum Damage Parameters on Error and Scatter-band for Predicted Low-cycle Fatigue Lifetime of AZ۶۱A Magnesium Alloy
۵۴. Evaluation of Flexural Properties of Auxetic Core Sandwich Beams under Three Point Bending Test
۵۵. Small Wind Turbine Propeller: A Special Design and Manufacture Issue for Optimal Renewable Energy Production
۵۶. Disc Brake Analysis and Design: Improve the Thermal Performance Based on Test and Simulation
۵۷. The Effect of Silane on the Curing Characteristics and Mechanical Properties of Natural rubber/Nanoclay/Calcium Carbonate Nanocomposite
۵۸. Influence of Fiber Twisting Angle on the Fracture of Layers of Multilayer Composite Pressure Vessels
۵۹. Effect of Thickness and Number of Layers on the Failure of Multilayer Composite Pressure Vessels
۶۰. Analysis and Optimization of Training Structure Called Car Lifter Lever
۶۱. Initial Stability Analysis of Spine Pedicular Screws Using Modal Analysis Method
۶۲. Improvement of welding tubes using magnetically impelled arc butt welding (MIABW) machine
۶۳. Effect of Fluid Level on Thermal Buckling Behavior of Different Reinforced Water Storage Tanks Adjacent to Pool Fire
۶۴. Effect of Prolonged Bed-rest on Thigh Muscle Atrophy
۶۵. Mechanical Behavior of Natural Sheepskin Leather in Tension
۶۶. Recognition of Optic Disk by Utilization of Histogram of Gradients
۶۷. Feature Selection in Milling Process Utilizing Wavelet Analysis
۶۸. Identification of the Optimum Level of Wavelet Decomposition for Acoustic Emission Signal Denoising of a Milling Machine
۶۹. Quasi-static Axial Compression of Eccentric Thin-walled Aluminum Tubes
۷۰. Experimental Analysis on Tensile Properties of Smart Sandwich Panels with FML Face Sheets Reinforced by SMA Wires
۷۱. Experimental Investigation of Short-term Creep Behavior of Carbon/epoxy Unidirectional Laminates
۷۲. Experimental Study of the Low-Velocity Impact (LVI) on CFRP Composite
۷۳. Modeling of Delamination in Composite Laminates under Fatigue Loading
۷۴. Experimental Study of Deformation and Failure Mechanisms in Unidirectional Fiber-reinforced Polymers
۷۵. Effect of SMA Short Strips on Mechanical Properties of Adhesive joints For Joining Fiber Metal Laminate to Steel Subjected to Tensile loads
۷۶. Experimental Study on Reducing Wear Damage of Gas Turbine Combustor Components Using Hardface Coatings at Elevated Temperatures
۷۷. Experimental Evaluation of the Effect of Surface Roughness on Wear Damage of Gas Turbine Combustor Components
۷۸. Uniaxial Tensile Behavior of Steel ۱.۴۸۳۵ at Ambient and Elevated Temperatures
۷۹. Experimental Investigation of Oxidation Rate of Thermal Barrier Coating for a Gas Turbine Combustion Chamber
۸۰. Experimental Investigation of Axial Forces in Centrifugal Compressors Based on API۶۱۷
۸۱. Introducing a New Mechanism as a Breakwater and Energy Harvester
۸۲. A Novel Mechanism that Harvests Energy via Ideal Hydraulic PTO Units
۸۳. On the Interlaminar Shear Strength of Basalt Fiber/Epoxy Composite Filled with Nano-ZrO۲/Graphene Oxide Nanohybrid
۸۴. Effect of CaCO۳ Nanoparticles on the Flexural Properties of E-glass Chopped Strand Mat/Epoxy Composites
۸۵. Experimental Investigation of Mechanical Properties of Al/Mg Composite Sheets Manufactured by Roll Bonding
۸۶. Effect of Nano-particle Dispersion Methods on Mechanical Behavior of Al-GFRP Bonded Joints under Bending Moment
۸۷. Designing and Manufacturing of a ۳D-printed, Open-source Acrylonitrile Butadiene Styrene Dynamic Splint for Rehabilitation of Fingers Flexor Tendon Injury
۸۸. Analysis of Fused Deposition Modeling Acrylonitrile Butadiene Styrene Dynamic Splint for Rehabilitation of Fingers and Hands by Finite Element Method
۸۹. Effect of Moisture on Mechanical Properties FML Composite (GLARE) Based on Experimental and FEM Simulation
۹۰. The Effect of Thermal Spray Parameters on the Tensile and Temperature of the Coated Equipment
۹۱. Investigation of Nonlinear Torsional Oscillations on Functionally Graded Nanorod
۹۲. Investigating the Effects of Aerodynamic Force Model on the Response of a Galloping PZT Energy Harvester
۹۳. Effect of Hydroxyapatite Sub-micron Particles on Microhardness and Corrosion Behavior of Mg-۳Zn Magnesium Alloy